FUNCTION OF CONTROLS
R
6
16 9
14
19
1
18
7
5
17
L
U
D
M P 3 C D / C D / C D - R / C D - R W P L A Y E R
L
U
D
DISP
RPT
RDM
SCAN
ALL
DIR
SONG
CLASSIC
JAZZ
JC-CD260
BND
ST
MUT
LOC
CLK
LUD
3
MUTE
LOUD
AF
PTY EON
MUSIC
MONO
60 WATT/DIGITAL TUNING SYSTEM
SCN
A/PS
2INT
4RDM
5D-DN
6D-UP
1
3RPT
MODE
Instruction Manual
L
U
D
21
22
23
20
2
15
11
12
13
4
8
10
L
U
D
Mp3 CD/C D / C D - R / C D - R W P L A Y E R
CONTROL
FUNCTIONS
L
U
D
DISP
RPT
RDM
SCAN
ALL
DIR
SONG
CLASSIC
JAZZ
BND
ST
MUT
LOC
CLK
LUD
MUTE
LOUD
AF
PTY EON
MUSIC
MONO
1.POWER ON/OFF
Press any key to power up the unit.
Press this key for more than 1 second to turn off unit.
60 WATT/DIGITAL TUNING SYSTEM
SCN
A/PS
2INT
4RDM
5D-DN
6D-UP
1
3RPT
MODE
L
U
D
2,3. SEL (control mode select)/MENU KEY
Push to select the desired mode,VOL(volume),BAS(bass),TRE(treble)
BAL(balance),or FAD(fader).
This button normally functions as the volume control.Adjust the level
rotate(3) after selecting the desired control mode.Otherwise the mode
will go back to the volume control mode.
CAR CD 12/45SEC / Mp3 120SEC ASP PLAYER
RECEIVER (AM/FM)
Turn counter clockwise:
Control Mode
Volume control
Bass control
Turn clockwise:
For less volume
For less bass
For more volume
For more bass
Treble control
Balance control
Fader control
For less treble
To decrease the rightspeaker volume
To decrease the frontspeaker volume
For more treble
To increase the leftspeaker volume
Toincrease the rearspeaker volume
DETACHABLE FRONT PANEL
MENU KEY
Hold the SEL key to choose the menu.
1) menu1:
Press and hold longer than one second to activate the DSP feature.Rotate the SEL knob to select
DSP mode sound effect as shown in sequence below.User setting value of bass/treble in normal
mode is always memorized.In rock/classic/pops mode,bass/treble mode is skipped and level is
not changeable
FLAT----CLASSICS----POP M----ROCK M----DSP OFF.
Bass and Treble gain of each mode is as shown in below table.
Initial value of bass/treble in NORMAL mode is 0 dB.
-- 1 --
CD CONTROL LOCATION OF PARTS
18
19
D.If LCD shows 013 then ,press ENTER key again. Then 2ND digit is selected.LCD will show 130.
e.Third digit 0 is displayed.Then press SEARCH UP key 3 times to enter 3RDdigit to 3.
f.Press ENTER key LCD shows 133,The track number is selected and ready to be played.
g.Finally press ENTER,then track number 133 will play immediately.
17
L
U
D
M P 3 C D / C D / C D - R / C D - R W P L A Y E R
L
U
D
f.SEARCH UP/DOWN key perform to shift number grom 0-9 as a loop rotation.
DISP
RPT
RDM
SCAN
ALL
DIR
SONG
CLASSIC
JAZZ
BND
ST
MUT
LOC
CLK
LUD
FILE SEARCH EXAMPLE
If the structure of Disc above has Mp3 TOC,it is as follows.
Total Dir:4 Total song:7
Dir of Mp3 files:3 (A,C,D)
MUTE
LOUD
MONO AF
PTY EON
MUSIC
60 WATT/DIGITAL TUNING SYSTEM
SCN
A/PS
2INT
4RDM
5D-DN
6D-UP
1
3RPT
MODE
We regard Dir as Mp3 file. When operating it is located as A---C---D--A...
To listen to a song from Mp3 (ON Normal play)
1.Press search key (2 times) [file search mode displays.]
L
U
D
2.Press enter key [ -A- Dir display.]
DISC
A
C
21
22
20
23
C.MP3
D.MP3
3.Press search down key (2 times) [-D- Dir displays.]
4.Press enter key (1 times) [ -e- file displays.]
5.Press search down key (1 times) [-f- file displays.]
6.Press enter key [ -F- Mp3 file plays start.]
17.CD EJECT BUTTON
Press the EJECT button to remove the CD.The receiver will automatically switch to radio mode.
18.CD SLOT
A.MP3
B.MP3
E.MP3
F.MP3
G.MP3
B
D
.
19.TRACK/SEARCH BUTTON
FORWARD AND REVERSE TRACK SEARCH
CHARACTER SEARCH EXAMPLE
If the structure of Disc above has MP Toc,it is as follows
Total Dir:4 Total song:7
Dir to have Mp3 files:3 (A,C,D)
Press the SKIP button or
during play to go to the desired track(song).
(
....REVERSE)( ....FORWARD )
Back.MP3
Fortune.MP3
Asia.MP3
Delight.MP3
A
C
DISC
Press and hold the SKIP button or during play to scan the disc at high speed.When the
desired music section of the disc is found,release the button.Normal play will resume.
20.PAUSE BUTTON
To listen to a song from Mp3 (On normal play)
1.Press search key (3 times) [character search mode displays.]
2.Press enter key [ -character A displays in the 1 ST digit.]
3.Press search down key (4 times) [-character E displays.]
4.Press enter key (1 times) [-character EA displays.]
5.Press search down key (2 times) [-character EC displays.]
6.Press enter key [-character ECA displays.]
B
D
China.MP3
Echo.MP3
Glass.MP3
During PLAY press button to PAUSE.Press it again to resume play.
21.INT BUTTON (Priview all Tracks)
This feature allowes you to listen to the first 10 seconds of each track on the
display .Press the key SCAN indicator appears on the LCD pannel.
To cancel the function press the key again.
7.Press search down key (7 times) [-character ECH displays.]
8.Press enter key [-character ECHA displays.]
22.REPEAT BUTTON (RPT)
9:Press search down key (14 times) [-character ECHO displays.]
10:Hold enter key for longer than 0.5sec, ECHO file begin playing.
M5 DN M6 UP IS ASSIGNED AS 10 TRACK when normal play and searching file or directory.
To repeat the current track press the key.The RPT indicator appears on the LCD
panel and the track be repeated continuously.
To cancel the function press the key again.
23.RANDOM BUTTON (RDM)
HOW TO REMOVE AND INSTALL THE FRONT PANEL
Press the key. Track will be palyed in randomorder.
To cancel the function press the key again.
1. Press the release button and pull-off the front panel.
2. To install the front panel, insert the panel into the housing and make sure the panel is securely
installed, otherwise, abnormalities occur on the display or some keys will not function properly.
AS/PS is the Digital Audio Mode selection key (Mp3)
When pressed,it selects the mode of Digital Audio.
Search track directly -----Search File or directory----- Search character name
1. Search tracks directly in digital audio Mp3.
PRECAUTIONS
Do not touch the contacts on the front panel or on the unit body, since this may result
in poor electrical conductivity. If dirt or other foreign substances get on the contacts, wipe
them with a clean dry cloth.
TRACK SEARCH EXAMPLE
1.How to find track number 133,Title name ABC .mp3
a.Press SEARCH key to go to TRACK search mode.
The LCD,displays first digit, 001.
PRECAUTIONS WHEN HANDLING THE FRONT PANEL
Do not leave the front panel in any area exposed to high temperatures or direct sunlight.
Do not drop the front panel or otherwise subject it to strong impact.
Do not allow such volatile agents as benzene, thinner, or insecticides to come into contact with
the surface of the front panel.
b.Press ENTER(SEL/MENU)to accept 1 digit 1,then LCD will show 010. 1ST digit 1 is selected.
c.Then press SEARCH UP (VOL+) key 3 times,then 2 digit will increase according to the numb
er of times key is pressed.
Never try to disassemble the front panel.
-- 5 --
-- 4 --
REMOVING THE FRONT PANEL
Front Panel
1. Dashboard
2. Nut (5mm)
3. Spring washer
1
4. Screw (5 x 16mm)
5. Screw
6. Strap
6
7
4
Be sure to use the strap to secure the
back of the unit of the place. The strap
can be bent by hand to the desired
angle.
5
2
7. Plain washer
Release Button
3
INSTALLING THE FRONT PANEL
1. Frame
2. Insert fingers into the groove in the front
of frame and pull out to remove the
frame .(When re-attaching the frame.
Point the side with a groove downwards
and attach it.)
1
INSTALLATION
3. Lever
Insert the levers supplied with the unit
into the grooves at both sides of the unit
as shown in figure until they click.
Pulling the levers makes it possible to
remove the unit from the dashboard.
3
NOTE:
Choose the mounting location where the unit will not interfere with normal driving function.
Before finally installing the unit, connect the wiring temporarily and make sure it is all connected
properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications
of the vehicle.
Install the unit where it does not get in the driver s way and cannot injure the passenger if there
is a sudden stop. Like an emergency stop.
4 SPEAKER WIRING
If installation angle exceeds 30 from horizontal,the unit might not give its optimum performance.
Avoid installating the unit where it would be subject to high temperature.such as from direct
sunlight. Lower case or from hot air, from the heater,or where it would be subect to dust, dirt or
excessive vibration.
CONNECTIONS
ANTENNA
DIN FRONT/REAR-MOUNT
BLACK
GROUND(-)
RED(R)
This unit be can be properly installed either from Front (conventional DIN Front-mount) or Rear
(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For
detail, refer to the following illustrated installation methods.
FUSE
0.5A
LINE OUT
WHITE(L)
BLUE
AUTO ANT(+)
RED
GRAY
DIN FRONT- MOUNT (Method A)
Installing the unit
RED(R)
1A
7A
B (+)
LINE IN
WHITE(L)
BLACK
YELLOW
BACK UP
2
1
GRAY +
+ WHITE
FRONT
LEFT
FRONT
RIGHT
SPEAKER
1. Dashboard
2. Holder
SPEAKER
After inserting the holder into the
- WHITE/BLACK
+ GREEN/BLACK
GRAY/BLACK-
VIOLET +
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
REAR
LEFT
SPEAKER
REAR
RIGHT
SPEAKER
3. Screw
- GREEN
VIOLET/BLACK-
3
-- 7 --
-- 6 --
USING THE RESET BUTTON
Press button with a thin, pointed object if unit is malfonctioning. Though not a normal
occurrence, the microprocessor which controls the operation of this unit can be affected
by electrostatic noise.
This generally is indicated by such symptoms as no power being supplied when you switch
the unit on, failure of buttons and controls, or an abnormal display.
Should this happen, press the reset button with a thin, pointed object to reset the microprocessor.
RESET
FLASHING
SPECIFICATIONS
MW(AM) SECTION
Frequency Range
Channel Step
: 530 - 1710 KHz
: 10 KHz
Intermediate Frequency
Usable Sensitivity
Image Rejection Ratio
If Rejection Ratio
: 450 KHz
: 33 dB
: >50 dB
: >50 dB
FM SECTION
Frequency Range
Channel Step
: 87.5-107.9 MHz
: 200 Khz
Intermediate Frequency
Image Rejection Ratio at 106KHz
Signal to noise ratio
: 10.7 MHz
: >50 dB
: >60 dB
CD PLAYER SECTION
Signal to noise Radio
Channel separation
: More than 60dB
: More than 60dB
Frequency Response
: 20Hz - 20KHz
GENERAL
Power Supply Voltage
Speaker impedance
Maximum Output Power
Dimensions Chassis
: DC 12 Volts Negative Ground
: 4 -8
: 15W x 4CH
: 178(W) x 50 (H) x 160(D)mm
-- 8 --
|